Downloadable Software Files
For Laureate Digital Panel Meters, Counters & Remote Displays

Log Data from up to 31 digital panel meters and counters connected to a PC via a single RS-485 data line is possible with Laurel's Windows based datalogging software. PC screens can display up to 64 simulated meters, which can be mathematical combinations of meter readings as well as totalized analog readings. Data can be captured in disk in the form of ASCII files for graphing and analysis using a program such as MS Excel. Click here for additional information.

• log4_0_2.exe (4.5 MB).The demo version is free. Connection to actual instruments requires a 12-digit activation code upon payment of $150, and software installation must be within 10 days of issue.

Instrument setup can be achieved from the front panel of Laureate instruments, but the process can be simplified by connection to an external PC and use of Laureate setup and calibration software. The same software applies to all Laureate meters, counters, remote displays, and transmitters.

• instrument_setup.exe (setup & calibration software, 6 MB, Version 2_4_0).
• Information & instructions for instrument_setup.exe.

Absolute calibration of Laureate meters and counters requires an external lab standard, connection to an external PC, and use of appropriate Laureate calibration software. Calibration will be prompted from the computer screen.

• instrument_setup.exe (6 MB). Setup and calibration software for Laureate DC, microvolt, process and AC meters, plus counters and timers.
• caltc4q.exe (116 KB). For Laureate thermocouple and RTD temperature meters.
• callc4q.exe (121 KB). For Laureate load cell meters used in ratiometric bridge mode. Requires file loadcell.fil (17 bytes) to be installed in same directory.
• caldc4q.exe (133 KB). For Laureate DC and strain meters used in ratiometric bridge mode or potentiometer follower mode. Requires file dcratio.fil (17 bytes) to be installed in same directory.
• vfcal3.exe (73 KB). For an analog totalizer, which uses V-to-F signal conditioner. 
• analcal.exe (53 KB). For an analog output board, used with digital panel meters.
• analcalc.exe (53 KB). For an analog output board, used with counters and timers.
• Information & instructions for caltc4q.exe, callc4q.exe and caldc4q.exe.
• serial5p.exe (2.1 MB). Zipped set of communication utilities to be used with Laureate instruments. Uses commands described in the serial communications manual to diagnose communications and retrieve information from meters.

Meter initialization software tells the Laureate instrument what type of meter or counter it is. Used as a master reset.

• re_init.exe (46 KB)

Custom Curve Linearization is a capability of Extended Laureate meters, counters, and transmitters. The Extended ordering option is required. Setup requires an external PC, a serial communications board, and Laureate linearizing software, which can be downloaded at no charge. The same software handles Laureate meters, counters and transmitters. Following calibration, the serial communications board can be removed if desired. For more information, please see our custom curve linearization page.

• curve4_1.exe (200 KB)