MAGNA Series Large Digit Clocks & Timers

Factory Clocks, Count-Up Timers, Count-Down Timers
Key Features
  • Choice of 2-1/4", 4", 6" or 8" digit heights
  • Choice of 4 or 6 digits with colon dividers
  • Choice of normal or outside viewing brightness
  • Choice of RS232 or RS485 serial data input
  • Choice of panel mount, wall mount or suspension mount
  • Choice of 95-264 Vac or 11-30 Vdc power
  • Sealed to NEMA-4 (IP65)
  • Only 3.0" (75 mm) deep
  • Programmable from front panel
  • Optional two or four 2A relay outputs, analog output, serial I/O

Description Back to top
MAGNA Series Clock & Timer Large Digit Displays can serve as accurate time-of-day clocks that are visible across a factory floor. Typical accuracy is within two minutes per year. By using the optional serial data output, a single clock display can feed up to 32 synchronized slave displays around the factory.

MAGNA Series Clock & Timer Large Digit Displays can also serve as highly accurate count-up or count-down timers. A quartz-crystal controlled timing reference provides excellent long-term stability. Start and stop signals can be proved by common industrial pulse inputs, such as contact closures, NPN or PNP proximity sensors, 5V logic pulses, or 24V PLC pulses.

Viewing distances up to 320 feet (100 m) are achieved with oversize digits. A rule of thumb is that viewing distance in feet is 40 times digit height in inches, or in metric terms, that viewing distance in meters is digit height in millimeters divided by 2.

Four digit heights are available: 57 mm (2-1/4"), 102 mm (4.0"), 150 mm (5.9"), and 200 mm (7.9"). Solid segments are used for normal brightness 2.2" and 4.0" digits. Individual 5 mm LED pixels are used for larger digits and outdoor brightness versions. Clock displays are available with 4 or 6 digits for a HH:MM or HH:MM:SS display with colon dividers.

Indoor or Outdoor Viewing: MAGNA Series Displays with normal brightness LEDs can be read across an entire plant floor to keep workers informed without leaving their work area. Displays with outdoor brightness LEDs can be read across an industrial yard, parking lot or roadway, for example to display vehicle load. Available mounting options are panel mount, wall mount and suspension mount. Environmental sealing to IP65 (NEMA-4X) is standard.

Options include two or four 2A relays, an analog output, an RS232 or RS485 serial data output, and 95-264 Vac or 11-30 Vdc power.

Intuitive Setup is normally provided by means of built-in front panel switches, which can be locked. It is also possible to remotely wire four pushbuttons to the display.

Pulse input board
Relay option board
Serial data
output boards
Analog output boards
Specifications Back to top
Approvals
Types Produced to IPC 610 Class 2 Standard
UL ISO9001:2008 QA
Time Base
Time Reference Precision, temperature-compensated quartz crystal.
Display
Number of Digits
Digit Height
Digit Color
Brightness
Clock Format
4 or 6
57 mm (2-1/4"), 102 mm (4.0"), 150 mm (5.9"), or 200 mm (7.9")
Red
Variable
HH:MM or HH:MM:SS
Logic Inputs
Front Panel Controls
Logic Functions
  
Logic Levels
Four buttons to set time, date, alarms, etc.
Three logic inputs, individually configurable for Hold, Reset, Tare, Peak / Valley, Net/Gross, Memory Address.
Normally open, NPN or contact closure input to activate.
5V open circuit, 1 mA switched current.
Power
AC Power (standard)
DC Power (option)
Max Consumption
100-240 Vac
11-30 Vdc
30 VA
Analog Output Option
Output Levels
  
  
Resolution
Accuracy
Stability
Output Isolation
Scaling
Special Features
0-20 / 4-20 mA into 0 to 500Ω, 0.4 µA resolution.
0-10V into loads > 600Ω, 0.2 mV resolution.
-10 to+10V into loads > 600Ω, 0.4 mV resolution.
16 bits
0.1% of range
50 ppm/°C
Isolated from input and power
Digitally scalable
Forward or reverse action possible.
Can be set to operate from net or gross value.
Alarm Output Option
Relay Type
Special Features
Two or four relays rated 2A, 250VAC, SPDT
Adjustable hysteresis
Energize or de-energize on trip.
Adjustable timers to set energize and de-energize delays. Can also be set to pulse for applications needing less than 100% duty cycle.
In-band and out-of-band alarm function.
Manual and automatic in-flight compensation.
Can be set to operate from net or gross value.
Serial Data Output Option
Output Types
Special Features
RS232 or RS485, addressable, on demand or continuous output.
Can include time and date with RTC option fitted.
Can be set to operate from net or gross value.
Environmental
Storage Temp.
Operating Temp.
Sealing
Mounting
-20°C to +70°C
0°C to 50°C, non-condensing
IP65 standard, all-round
Wall mount, suspension mount, panel mount

Mechanical Back to top
Number of Digits & Case Dimensions

Display Format
Case width x height4 Digits6 Digits
57 mm (2.2") digits279 x 155 mm
(11.0" x 6.1")
376 x 155 mm
(14.8" x 6.1")
102 mm (4.0") digits 434 x 196 mm
(16.7" x 7.7")
616 x 196 mm
(24.3" x 7.7")
150 mm (5.9") digits 514 x 247 mm
(20.2" x 9.8")
744 x 248 mm
(29.3" x 9.8")
200 mm (7.9") digits 664 x 298 mm
(26.1" x 11.7")
984 x 298 mm
(38.7" x 11.7")
Case depth75 mm (3.0")
Notes:
Models with 57 mm (2.2") digits, 4 digits and 4 relays require the larger 6-digit case.
For panel mount versions, add 18 mm (0.7") to case width and height for the bezel and 25 mm (1.0") for cable glands in back of the case.
Ordering Guide Back to top
MAGNA Series Clock Large Digit Displays
Click on the radio buttons to build a model number with pricing (shown below the Ordering Guide). Prices are in US dollars and do not include shipping or duty charges (export sales).

Configured model number M2000002CLK4
Configured price per model $735
Quantity 1
Extended price $735

Quantity

Base
Model

  2-¼" (57 mm) digit height
4  4" (102 mm) digit height
6  6" (150 mm) digit height
8  8" (200 mm) digit height
$600
$905
$1605
$1940
Display
Brightness
Normal Indoor brightness
1  Daylight viewing brightness
$0 
$270
Power
0  95-265 Vac
1  11-30 Vdc
$0
$115
Setpoint
Output
0  None
1  Two 2A @ 250 Vac Relays
2  Four 2A @ 250Vac relays (6 digit)
3  Two 2A @ 250Vac relays (4 digit, requires 6-digit case)
4 Four 2A @ 250Vac relays (4 digit, requires 6-digit case)  
$0
$70
$95
$125
$150
Analog
Output
0  None
1 4-20 mA
2 0-10V
3 -10 to +10V
$0
$90
$90
$150
Digital
Output
0  None
1 RS232
2 RS485
$0
$80
$115
Mounting
1  Black case, panel mount
2  Black case, wall mount
3 Black case, suspension mount
$90
$0
$0
Input
Type
Clock / Timer Input
CLK4  4 digits, HH:MM
CLK6  6 digits, HH:MM:SS
 
$135
$475


feedback
Back to Top