 |
Digital Panel Meters for Position,
|
|||||||||||||||||||||||
|
|
Laureate Quadrature Position & Rate Meter,
Model QD This counter accepts low-level differential or single-ended 5 V logic level quadrature signals from shaft encoders to display scaled position or scaled rate in engineering units from -999,999 to +999,999. Six 0.56" (14.2 mm) high digits, 1/8 DIN case. |
|
|
Laureate
Dual-Channel Pulse Totalizer, Model FR For position, one channel counts pulses from a sensor with a pulse output, such as non-contact proximity switch, and a second channel is used to inhibit counts or to change the count direction for dynamic up / down totalizing. Speed can also be displayed. Display scaled in engineering units from -999,999 to +999,999. Six 0.56" (14.2 mm) high digits, 1/8 DIN case. |
 |
|
Laureate Linear
Displacement Meter, Model P In linear displacement transducer or potentiometric pot follower applications, the signal from a sliding contact voltage divider is converted to position units such as feet, cm, or mm. Speed is obtained from successive readings. High 1 Gohm input resistance on 2 V scale. Display scaled in engineering units from -99,999 to +99,999. Five 0.56" (14.2 mm) high digits, 1/8 DIN case. |
 |
|
Resource Pages |
