Pressure Meters

Product Introductions
Navigation:  Home > Product Introductions

Laureate™ digital process meters are ideal pressure meters or manometer readouts for use with pressure transducers with a DC voltage output, such as 0-10 V, or with a DC current output, such as 0-1 mA, 0-10 mA, or 4-20 mA.

The display of Laureate pressure meters / manometers may be scaled to 5 full digits from -99,999 to +99,999 from the front panel to read directly in engineering units, such as PSI. Three manometer pressure meter scaling methods are selectable: scale and offset, two-point method, and system-level calibration using actual pressure transducer signals. All DC ranges are pre-calibrated at the factory.

Laureate™ frequency & rate meters are ideal pressure meters for use with pressure transducers with a pulse output. The pressure meter display may be scaled to 6 full digits from -999,999 to +999,999 from the front panel to read directly in engineering units, such as PSI. The pressure transducer output frequency can vary from 0.005 Hz to 1 MHz. The pressure transducer output amplitude can vary from 12 mV to 250 Vac

An isolated pressure transducer excitation supply is built into all Laureate meters: 5 Vdc at 100 mA max, 10 Vdc at 120 mA max, and 24 Vdc at 50 mA max. This built-in supply can eliminate the need for an expensive external power supply.

More Information on Laureate Digital Panel Meters & Counters

5-Digit Digital Panel Meter Applications

6-Digit Digital Counter Applications:

6-Digit Remote Digital Display

Exceptional flexibility is achieved for a Laureate digital display by programmable features and up to 5 plug-in boards in addition to the main board. Please see our  Laureate product line overview.

feedback
Back to Top