Wall-Mount Enclosure
Allows one 1/8 DIN meter to be bulkhead mounted.
Environmentally sealed to IP65 / NEMA-4X.
  

Models BOX1 is a wall-mount / bulkhead enclosure which provides environmental protection to IP65 / NEMA-4X for an 1/8 DIN instrument. It comes with a single 1/8 DIN panel cutout (45 x 92 mm) for use with 1/8 DIN instruments with a depth up to 134.5 mm (5.30"). This includes all 1/8 DIN instruments sold by Laurel Electronics.

The compartment which houses the instrument is sealed. The mounting holes are on the rear surface, outside of the sealed compartment. The wire feedthroughs are via three sealed using cable glands, which accept cables up to 6 mm (0.24") in diameter. Stainless steel screws and high-impact polycarbonate provide durability.

The BOX1 panel cutout can be expanded by the user up to 150 x 71 mm (5.90" x 2.80") or 131 mm x 110 mm (5.16" x 4.33") to accommodated instruments larger than 1/8 DIN. Molded standoffs with a height of 6.5 mm (0.25") can be snipped off by the user if required. Please see the photograph below.

 View into sealed housing.

Environmental Protection to IP65 / NEMA-4X

• If the front panel of the instrument already provides environmental protection to IP65 / NEMA-4X from the front, such as the Laureate Series, then the entire instrument will be protected IP65 / NEMA-4X once it is installed in Model BOX1.
   
• If the front panel of the instruments does not provide environmental protection, but the instrument fits in a 1/8 DIN panel cutout (45 x 92 mm), Model BOX1 may be ordered with the IPC Splashproof Cover as Model BOX2, as illustrated at the top of this page. The combination of Models BOX and IPC will provide IP65 / NEMA-4X protection to 1/8 DIN instruments regardless of manufacturer, provided that the instrument depth is within 134.5 mm (5.30").