Model L10000P385F includes:
Model L10000P385F RTD temperature panel meter / controller by Laurel Electronics is factory configured for Pt100 100 ohm platinum RTD, DIN alpha, -331 to 1562 degrees F, No relays, No analog output, No communication option, Universal 85-264 Vac power.
The Laureate RTD meter is factory calibrated for four Resistance Temperature Detector (RTD) types: 100 ohm platinum (Pt 100) with DIN alpha of 0.00385, 100 ohm platinum (Pt 100) with ANSI alpha of 0.003902, 10 ohm copper with alpha of 0.00427, and 120 ohm nickel with alpha of 0.00672. The entire span of each RTD type is presented in a single range. The RTD type, unit of measure (%C or %F) and resolution (1%, 0.1% or 0.01%) are selectable from the front panel or via the meter's serial interface.
RTD connections can be via 2, 3 or 4 wires. With 3 or 4-wire connections, the meter automatically compensates for lead resistance to the sensor. With 2-wire connection, the meter can measure and then subtract the lead wire resistance.
All ranges for all RTD types are digitally calibrated at the factory, with calibration factors stored in an EEPROM on the signal conditioner board. This allows temperatures sensors and signal conditioner boards to be changed in the field without recalibrating the meter.
Optional plug-in boards for communications and control include Ethernet and other serial communication boards, dual or quad relay boards, and anisolated analog output board. Laureates may be powered from 85-264 Vac or optionally from 12-32 Vac or 10-48 Vdc. The 1/8 DIN case meets NEMA 4X (IP65) specifications from the front when panel mounted.
Visit Laureate RTD Temperature Panel Meter / Controller for detailed meter information, specifications, dimensions and pricing.