Call (714) 434-6131 for Product Assistance
Transmitters, 4-20 mA & Modbus - Panel Meters - Counters - Timers - Ethernet - USB - RS485 - RS232

Laurel Serial Input Displays & Serial-to-Analog Converters

Product Selection Guide

The serial input products described in this page can extract readings from long ASCII strings for local display or output as a 4-20 mA, 0-10V or -10V to +10V isolated analog signal. The displays can be similar to a digital panel meter, or they can be large-digit displays legible across a plant floor or outdoor yard. Serial-to-analog conversion can be performed by a serial input meter, or by a DIN rail mounted serial-to-analog converter. Please click on the links below for detailed product information.

Laureate 6-digit remote display and serial input meter

Laureate 6-Digit Remote Display

Accepts RS232, RS485, USB or Ethernet data and extracts up to 6 digits from long data strings for display. An optional isolated analog output board can convert the unit to a digital-to-analog converter and transmitter. An optional relay output board can add local alarm or control capability. The relays can respond to the transmitted values or to control characters.
Magna Large-Digit Serial Input Display

MAGNA Large-Digit Serial Input Display

Available with 4 or 6 digits and digit heights of 2”, 4”, 6” or 8” (57, 102, 150 or 200 mm) and LEDs for indoor or outdoor viewing, these large-digit displays are legible across a plant floor or outdoor yard. Able to extract readings from long RS232 or RS485 data strings. Available with optional relays and analog output. Environmentally sealed to NEMA-4 (IP65).
RS232/485 Serial-to-Analog Converte

RS232/485 Serial-to-Analog Converter

Accepts RS232 or RS485 serial data using the Modbus protocol, Laurel ASCII protocol, or direct ASCII characters, and converts this data to a scalable 4-20 mA, 0-10V or -10V to +10V isolated 16-bit analog output. Able to extract readings from long ASCII data strings. Includes two 120 mA AC/DC relays which can respond to transmitted values or to control characters. DIN rail mounted.
Ethernet Serial-to-Analog Converter

Ethernet Serial-to-Analog Converter

Accepts Ethernet serial data using the Modbus TCP protocol, Laurel ASCII protocol, or direct ASCII characters, and converts this data to a scalable 4-20 mA, 0-10V or -10V to +10V isolated 16-bit analog output. Able to extract readings from long ASCII data strings. Includes two 120 mA AC/DC relays which can respond to transmitted values or to control characters. DIN rail mounted.
Legal Information
seal-20th17    
facebook   G+   twitter   linkedin
© 1990-2017 Laurel Electronics, Inc.
feedback