Call (714) 434-6131 for Product Assistance
Transmitters, 4-20 mA & Modbus - Panel Meters - Counters - Timers - Ethernet - USB - RS485 - RS232

Digital Panel Meters for Position, Length, Angle & Speed

Exceptional flexibility to solve industrial measurement & control problems

Product Selection Guide

Measurement of position, length, angle and speed using programmable digital panel meters and digital counters
Position, length, angle and speed scaled to engineering units can be displayed by the three Laureate digital panel meters below. The readings are arithmetically scaled for display in engineering units, such as inches, mm, degrees, or m/s. Options include an analog output scaled to the display, relays for alarm or control, and data I/O. Five or six 0.56" (14.2 mm) high digits, 1/8 DIN case.
Laureate Quadrature Position & Rate Meter, Model QD

Laureate Quadrature Position & Rate Meter, Model QD

This counter accepts low-level differential or single-ended 5 V logic level quadrature signals from shaft encoders to display scaled position or scaled rate in engineering units from -999,999 to +999,999. Six 0.56" (14.2 mm) high digits, 1/8 DIN case.
Dual-Channel Pulse Totalizer

Laureate Dual-Channel Pulse Totalizer, Model FR

For position, one channel counts pulses from a sensor with a pulse output, such as non-contact proximity switch, and a second channel is used to inhibit counts or to change the count direction for dynamic up / down totalizing. Speed can also be displayed. Display scaled in engineering units from -999,999 to +999,999. Six 0.56" (14.2 mm) high digits, 1/8 DIN case.
Process Meter and Scalable Digital Panel Meter

Laureate Linear Displacement Meter, Model P

In linear displacement transducer or potentiometric pot follower applications, the signal from a sliding contact voltage divider is converted to position units such as feet, cm, or mm. Speed is obtained from successive readings. High 1 Gohm input resistance on 2 V scale. Display scaled in engineering units from -99,999 to +99,999. Five 0.56" (14.2 mm) high digits, 1/8 DIN case.
Legal Information
seal-20th17    
facebook   G+   twitter   linkedin
© 1990-2017 Laurel Electronics, Inc.
feedback