Custom cable to connect the RS232 port of a PC to a Laureate meter with the RS232 option board (ordering option 1). Can be used with CBL02
to connect the USB port of a PC to a Laureate meter with an RS232 option board.
Cable CBL02 plus CBL01 connects the USB port of a PC to a Laureate meter with an RS232 option board. Cable CBL02 plus CBL04 connects the USB port of a PC to the RS232 port of a Laureate LT transmitter. Uses FTDI chip for compatibility with all versions of Windows.
Straight through 6-wire data cable, not a 4-wire telephone cable or crossover cable. Allows dual RJ11 jacks of the RS485 option board of Laureate meters (digital interface ordering option 2) to be daisy chained and be addressed digitally with no need for a hub. Works with half or full duplex.
Connects USB port of a PC to RS485 port of a Laureate meter with digital interface ordering option 2 (board P/N L485), or to a Laureate LT transmitter. Half duplex. For LT transmitters, remove RJ11 connector. Red & black = GND, green = ATX/ARX, white = BTX/BRX.
DIN rail mountable breakout board. Provides a parallel connection between two RJ11 jacks and a terminal block with 6 screw-clamp connectors. Allows a multi-point RS485 connection to Laureate meters with dual RJ11jacks and Laureate LT series transmitters with screw-clamp connectors.