Exceptional flexibility to solve industrial measurement & control problems
DC Digital Panel Meter
Exceptional accuracy and high read rates with five digital DC voltmeter ranges from ±200.00 mV to ±600.0 V and four digital DC ammeter ranges from ±2.0000 mA to ±5.000 A. Ideal for use with current shunts for high DC current measurements. All ranges are factory-calibrated and user-selectable.
True AC RMS Panel Meter
Five AC RMS voltmeter ranges from 200.00 mV to 600.0 V and four AC RMS ammeter ranges from 2.0000 mA to 5.000 A. Ideal for use with 5A current transformers (CTs) for high AC current measurements. All ranges are factory calibrated and user-selectable.
Process Meter & Analog Ratio Meter
User-scalable to ±99,999 with any decimal point for display in engineering units. Accepts DC process signals such as 4-20 mA or 0-10V which require zero and span adjustment. Includes an excitation output which can be set to 5V, 10V or 24V. Can be set to a ratiometric mode for use with strain gages and potentiometers.
Process Meter & Totalizer
User-scalable for display to ±999,999 with any decimal point. Displays the current reading or totalized reading from 0-1 mA, 4-20 mA or 0-10 V process signals which require zero and span adjustment. For example, it can display volume from a 0-10V flow transducer. Includes an excitation output which can be set to 5V, 10V or 24V.
Load Cell, Strain Gage & Microvolt Meter
A high-sensitivity 5-digit meter for use with load cells, strain gauges or microvolt input signals where high accuracy and stability are required. Most sensitive full scale is ± 20 mV. Load cell operation allows 4- or 6-wire hookup and display in engineering units, such as lbs, kg or psi. Built-in excitation of 5V or 10V can drive up to four 350-ohm load cells in parallel.
Scale / Weight Meter
Equipped with a DC or load cell signal conditioning board, this Laureate offers special firmware for scale / weighing applications: two tare functions; count by 1, 2, 5, 10, 20, 50 or 100; auto-zero function; setpoint offset, and dummy right-hand zero for display to 999,990. Built-in excitation of 5V or 10V can drive up to four 350-ohm load cells in parallel.
Thermocouple Temperature Meter
High accuracy in one instrument for seven thermocouple types (J, K, T, E, N, S, R), each in one range. User-selectable thermocouple type, °C or °F, and 1° or 0.1° resolution. Pre-calibrated for all sensor types. Wide range of options for communication and temperature control. Shipped ready to run.
RTD Temperature Meter
Exceptional accuracy RTD temperature meter for Pt100 100-ohm platinum RTDs (DIN or ANSI alpha), Ni120 nickel and Cu10 copper. User selectable RTD type, unit of measure (°F or °C) and resolution (1° , 0.1° or 0.01°). 3 or 4 wire hookup eliminates lead resistance effects. Factory calibrated for all RTD types. Wide range of options for communications and temperature control. Shipped ready to run.
Ohmmeter
Exceptional accuracy of ±0.01% of reading with with factory calibrated resistance ranges from 2.0000Ω to 20.000 MΩ. Resolution to 0.1 milliohm. Spline-fit custom curve linearization suits transducers like thermistors whose output is a changing resistance. 3 or 4 wire hookup eliminates lead resistance effects.
Linearizing Panel Meter
All capabilities of the Laureate process meter, plus custom curve linearization. Setup is easy using an external PC and linearizing software furnished by Laurel. For example, display liquid volume in irregularly shaped tanks, use with non-linear transducers, or extend the working range of nominally linear transducers.
L40 Low-Cost Universal Analog Input Digital Meter
Universal meter for 65 user-selectable analog input signal types and ranges: DC voltage and current, AC RMS voltage and current, process signals (4-20 mA, 0-10V), thermocouple (10 types, °C or °F), RTD (6 types, °C or °F), thermistors (NTC or PTC), resistance (0-10K or 0-100K ohms), and potentiometer inputs. Universal 18-265 Vac/dc power. 1/8 DIN case.
M-35 Microminiature Digital Process Meter
Fits a 22.5 x 45 mm panel cutout. Accepts 4-20 mA, 0-10 mA, 0-2 V, 1-5 V, or 0-10 V process signals. Powered by isolated 10-30 Vdc.
MAGNA Series 2", 4", 6" or 8" Large-Digit Displays
Available with four or six 57 mm (2.2"), 102 mm (4"), 150 mm (6"), or 200 mm (8") high digits for process signal, strain gauge, load cell, temperature and pulse inputs. Optional dual 5A relays, analog output, and serial output. Sealed to NEMA-4 on all sides. Choice of indoor our outdoor brightness.
Laureate™ Series Digital Panel Meters
The Laureate Series is Laurel's flagship line of 1/8 DIN programmable 5-digit digital panel meters, 6-digit digital counters and timers, and 6-digit remote displays. Digit height is 14.2 mm (0.56").
Modular design, a wide choice of plug-in options, exceptional accuracy, high speed (up to 60 readings / second), scalability, plus programmable features allow Laureates to be configured for applications from simple monitoring to computer interface and control. Setup can be from the front panel or by using powerful Setup & Calibration Software, which can be downloaded at no charge from our Software Download Page.
Datalogging Software turns a PC connected to up to 31 Laureate digital panel meters or digital counters into a powerful, low-cost datalogging system with virtual meter screen views plus arithmetic and totalizing capabilities.
| Laureate Options | Laureate Downloadable Files | |||||||
|---|---|---|---|---|---|---|---|---|
|
|
