Laurel Electronics
Call (714) 434 6131 for Product Assistance
Panel Meters - Counters - Timers - Transmitters, 4-20 mA & Modbus - Ethernet - USB - RS485 - RS232

MAGNA Series Frequency & Rate Input Large Digit Displays

For Frequency, Rate, Flow or Speed

Standard Features

  • Choice of 2-1/4", 4", 6" or 8" digit heights
  • Choice of 4 or 6 digits with decimal points
  • Choice of normal or outside viewing brightness
  • Frequency range from 0-100 kHz
  • Configurable for most industrial pulse signals
  • Choice of panel mount, wall mount or suspension mount
  • Choice of 95-264 Vac or 11-30 Vdc power
  • Sealed to NEMA-4 (IP65)
  • Only 3.0" (75 mm) deep
  • Programmable from front panel
  • Optional two or four 2A relay outputs, analog output, serial I/O
Description

MAGNA Series Frequency & Rate Input Large Digit Displays accept frequencies from 0 to 100 kHz. They accept the most common industrial pulse inputs, namely contact closures, NPN or PNP proximity sensors, 5V logic pulses, 24V PLC pulses, and quadrature encoders. The units are easily scaled to display frequency in Hz or rate in  engineering units such as feet/sec, gallons/minutes, liters/sec, etc. An isolated 24V excitation output is standard to power active sensors and encoders.

A quartz-crystal controlled timing reference provides excellent long-term stability. Scaling is digital for excellent precision. Scale factors can be non-whole numbers, such as 1.245.

Displayed values can be smoothed by averaging multiple readings over a preset time. The units accept extremely low input frequencies, such as production rate from an assembly line which only produces two items per hour.

Viewing distances up to 320 feet (100 m) are achieved with 8" digits. A rule of thumb is that viewing distance in feet is 40 times digit height in inches, or in metric terms, that viewing distance in meters is digit height in millimeters divided by 2..

Four digit heights are available as standard:  57 mm (2-1/4"), 102 mm (4.0"), 150 mm (5.9"), and 200 mm (7.9"). Solid segments are used for normal brightness 2.2" and 4.0" digits.

Indoor or outdoor viewing: MAGNA Series Displays with normal brightness LEDs can be read over a machine or across a plant floor. Displays with outdoor brightness LEDs can be read across an industrial yard, parking lot or roadway, for example to display vehicle load. A heater option allows outdoor operation in winter in cold climates. Available mounting options are panel mount, wall mount and suspension mount. Environmental sealing to IP65 (NEMA-4X) is standard.

Standard options include two or four 2A relays, an analog output, an RS232 or RS485 serial data output, and 95-264 Vac or 11-30 Vdc power.

Intuitive setup is normally provided by means of built-in front panel switches, which can be locked. It is also possible to remotely wire four pushbuttons to the display.


Pulse input board


Serial data output boards

        
Relay output boards

        
Analog output boards

Specifications
Approvals
Types Produced to IPC 610 Class 2 Standard
  UL ISO9001:2008 QA
Pulse Inputs
Number of Inputs 1
Signal Types Configurable for contact closures, NPN or PNP proximity switches, 5V logic pulses, 24V pulses, quadrature
Frequency Range 0-100 kHz in rate mode
Accuracy ± 0.05% of range, quartz crystal reference
Tempco ± 20 ppm/°C
Debounce Programmable to eliminate false counting from contact bounce.
Timing Reference Temperature-controlled quartz crystal.
Display
Number of Digits 4 or 6
Digit Height 57 mm (2-1/4"), 102 mm (4.0"), 150 mm (5.9"), or 200 mm (7.9")
Digit Color Red
Brightness Variable
Display Update Rate 3 readings/second above 3 Hz, otherwise signal pulse rate.
User Controls
Scaling Digital direct or theoretical scaling with scale & offset.
Filtering Digital filtering, time constants adjustable from 0 to 25 sec.
Rounding Selectable last-digit rounding of 1, 2, 5, 10, 20, 50 units.
Linearization Up to 10 points, direct or theoretical calibration.
Logic Inputs
Front Panel Controls Four buttons to set time, date, alarms, etc.
Logic Functions Three logic inputs, individually configurable for Hold, Reset, Tare, Peak / Valley, Net/Gross, Memory Address.
Logic Levels Normally open, NPN or contact closure input to activate. 5V open circuit, 1 mA switched current.
Power
AC Power (standard)  100-240 Vac
DC Power (option) 11-30 Vdc
Max Consumption 30 VA
Analog Output Option
Output Levels 0-20 / 4-20 mA into 0 to 500Ω, 0.4 µA resolution.
  0-10V into loads > 600Ω, 0.2 mV resolution.
  -10 to +10V into loads > 600Ω, 0.4 mV resolution.
Resolution 16 bits
Accuracy 0.1% of range
Stability 50 ppm/°C
Output Isolation Isolated from input and power
Scaling Digitally scalable
Special Features Forward or reverse action possible.
Can be set to operate from net or gross value.
Alarm Output Option
Relay Type Two or four relays rated 2A, 250VAC, SPDT
Special Features Adjustable hysteresis
  Energize or de-energize on trip.
  Adjustable timers to set energize and de-energize delays. Can also be set to pulse for applications needing less than 100% duty cycle.
  In-band and out-of-band alarm function.
  Manual and automatic in-flight compensation.
  Can be set to operate from net or gross value.
Serial Data Output Option
Output Types RS232 or RS485, addressable, on demand or continuous output.
Special Features Can include time and date with RTC option fitted.
  Can be set to operate from net or gross value.
Environmental
Storage Temp. -20°C to +70°C
Operating Temp. 0°C to 50°C, non-condensing. -25°C to 50°C, non-condensing, with MHTR AC heater option.
Sealing IP65 (NEMA4) standard, all-round
Mounting Wall mount, suspension mount, panel mount
Mechanical

Number of Digits & Case Dimensions

/magna-6-digit-clock
Display Format
Digit Height 4-Digit Case Width x Height 6-Digit Case Width x Height
57 mm (2.2") 280 x 155 mm (11.0" x 6.1") 376 x 155 mm (14.8" x 6.1")
102 mm (4.0") 434 x 196 mm (17.1" x 7.7") 616 x 196 mm (24.3" x 7.7")
150 mm (5.9") 580 x 247 mm (22.8" x 9.7") 820 x 248 mm (32.3" x 9.7")
200 mm (7.9") 750 x 2908 mm (29.5" x 11.7") 1072 x 290 mm (42.2" x 11.7")
Case depth 75 mm (3.0")
Note:   Models with 57 mm (2.2") digits, 4 digits and 4 relays require the larger 6-digit case. For panel mount versions, add 18 mm (0.7") to case width and height for the bezel and 25 mm (1.0") for cable glands in back of the case.
For applications assistance, phone 714-434-6131 ext. 104, or email support@laurels.com
Ordering Guide
MAGNA Series Frequency & Rate Digit Displays

Click on the radio buttons to build a standard model number with pricing (shown below the Ordering Guide). Prices are in US dollars and do not include shipping or duty charges (export sales). Please see our explanations and limitations applicable to pricing and online orders. Prices shown are in US Dollars and are Laurel's manufacturer's suggested retail price (MSRP) in the USA. Orders are processed manually, not directly by our shopping cart system. You don't have to supply credit card information when placing an online order.

North American Orders. Laurel does not sell factory-direct in the USA or Canada. Online sales orders are filled through distribution. During the ordering process, you will have the chance to select an authorized Laurel distributor, or you can ask Laurel to refer you to a distributor. The distributor will then contact you to quote shipping, tax and duty (where applicable), and arrange for payment.

International Orders. If your ship-to address indicates that you are outside of the USA or Canada and Laurel has a distributor in your country, we will forward your order to that distributor for follow-up. If Laurel does not have a distributor in your country, we will email you an order acknowledgment and a pro forma invoice which states the product price, shipping charges, and wire transfer information, which includes a $25 bank wire transfer fee.

Questions about your order? Please email your distributor or sales@laurels.com
MAGNA units are built to order. MAGNA orders are non-cancelable and non-returnable.

Customized large digit displays are available by special quotation:

  • LED colors green, blue, white,yellow (not just red).
  • Digit heights of 12", 16", 24" or 32" (not just4", 6" or 8").
  • 2 or 4 solid state relays (not just mechanical relays).
  • Stainless steel housing (for food processing and pharmaceutical industries).
  • Explosion-proof stainless steel housing rated for ATEX Zones 2 and 22 (equivalent to Class1 / Div 2).
  • Custom signs with different colors, with fixed captions, and with multiple numeric display windows.
 
Quantity
   SKU  Descriptions Price
Base meter
M24 2 inches (57 mm), 4 digits. Display to 8.8.8.8. $702
M26 2 inches (57 mm), 6 digits. Display to 8.8.8.8.8.8. $900
M44 4 inches (102 mm), 4 digits. Display to 8.8.8.8. $1104
M46 4 inches (102 mm), 6 digits. Display to 8.8.8.8.8.8. $1440
M64 6 inches (150 mm), 4 digits. Display to 8.8.8.8. $1944
M66 6 inches (150 mm), 6 digits. Display to 8.8.8.8.8.8. $1974
M84 8 inches (200 mm), 4 digits. Display to 8.8.8.8. $2388
M86 8 inches (200 mm), 6 digits. Display to 8.8.8.8.8.8. $2442
Signal Input (one required, select one)
MCR Counter / ratemeter $150
Analog output board (one optional)
None $0
MAO1 4-20 mA $114
MAO2 0-10V $114
MAO3 -10V to +10V $192
Relay output board (one optional)
None $0
MRL1 Two 5A, 250 Vac relays $96
MRL2 Four 5A, 250 Vac relays $126
Serial Data Output (one optional)
None $0
MO232 RS232 $102
MO485 RS485 with Modbus ASCII $150
Case and mounting (one required)
MT1 Panel mount, black NEMA-4 case $252
MT2 Wall mount, black NEMA-4 case $138
MT3 Suspension mount, black NEMA-4 case $138
Meter modifiying options (not shippable separately from meter)
MRDLV Daylight viewing brightness for operation down to 0°C (32°F) instead of normal indoor brightness $210
MHTR Heater for outdoor operation down to -25°C (-13°F) $480
MPS2 11-30 Vdc power instead of normal 85-265 Vac power $138
UM Extra case width for 2 blank digits $72
Use UM for units of measure like ºC. Required with M24 for relay, analog output or serial output options. Added at no charge with MHTR for M24 or M44.
Add-on Options
MRP Remote programmer with 2 meter cable (display can also be programmed from front panel) $180
 
Configured model number M24-MCR-MT2
Configured price per model $990
Quantity 1
Extended price $990
Legal Information
seal-20th24    
facebook   G+   twitter   linkedin
© 1990-2024 Laurel Electronics
feedback